How To Mount GPU Vertically? (Advance Guide!)

If you are thinking of mounting or building a PC, it will not be easy. But once you start doing it, you will find it so much fun! You will be crafting the computer from the grounds, and you need lots of planning so you can end up crafting a neat and clean PC. 

One of the best ways to clean your computer is mounting the GPU vertically. When you do this, you will require some expertise, which you will get from this guide!

Why would you mount a GPU Vertically?

Before you move forward, how can you do it, or what do you need to consider doing it? First, you need to understand why you would do it. What are the main reasons one may find it attractive and mount GPU? Nowadays, you may have seen most of the graphics cards on the bottom, where you can see the fans and other things.

But, most of the PC and their motherboards are designed to mount the GPU with the side facing at the top. So, when you use that vertically, that will benefit the window panel.

One more benefit is if you use the car mounted vertically, then GPU sag will be non-existing. But you need to know that it is not all good news because it does come with vertical mounting. You may even find some disadvantages as it restricts the airflow. That is the reason why you need to control the GPU temperature and set up the GPU in a way that will not cause many effects.

But you need to understand that its disadvantages are not too severe so if you decide to ignore that then there is nothing to worry about. You can easily ignore those demerits and then just go ahead!

Tips for mounting GPU vertically

Before you mount your GPU vertically, there are a few steps that you need to consider, and those are mentioned below-

  • When you mount vertically, the graphics card tends to block the airflow in the PC, and if you want to avoid that, then it will be best if you add the exhaust fan. Also, use two intake fans on the front side of the case.
  • The graphics’ width must not be more than 2.5 to 2.7 slots. If it is more extensive, get another case with the vertical mounting bracket to avoid the blockage of airflow. So, if your GPU blocks more space, the fan will operate at high voltage and frequency because of congestion. As a result, the graphics card may suffer from high temperatures.

How can you mount GPU vertically?

You may face a few problems when you mount GPU vertically- it may either choke off your graphics or get too close to the side panels when you have the two-slot card.

But if you do not want to change the case and want a vertical mount, then it is best to use an aftermarket vertical mount adapter. Here are a few steps you can consider that will help you know how to mount GPU vertically.

Step 1- Unboxing

It is a pretty standard step that everyone knows about. You need to unbox the aftermarket mount adapter vertically. But why is there a need to mention this step? It is crucial because you get to know about the different pieces of equipment you get from here. 

The first thing you will find is riser card-PCIe express cables that you can use to connect the graphics card to the motherboard. Then, you can see the 90-degree display port because in the way your GPU will mount, it will recess in a bit that will help you reach for accessibility. You may get two 90-degree display port cables, depending on the aftermarket product you choose.

Most of the aftermarket adapter has about seven slots, which is why you need to ensure it has seven available slots because then only you can move to the next step.

Step 2- Attach the adapter plate

The plate will have the notches facing the side of the motherboard and will be attached to your case. The person will know whenever it is attached perfectly, and once it is attached, you need to screw down the plate with the normal screws, which can also be used to mount any PCIe adapter.

Before attaching the plate, ensure that you have already connected the bottom piece of the plate with the adapter. It is crucial because it is where you need to mount the riser card. Next, align the screw holes on both sides of the plates and just use those screws connected to both plates. It is so simple to attach.  

Step 3- Connect the riser card

After connecting that piece to the bottom, then you need to align those screw holes n the riser card to the bottom piece. First, ensure that the riser car is perfectly aligned; you can simply tighten the screws.

Step 4- Connect it to the graphics card

So far, it is pretty simple for the person to connect all the pieces. It is simple; you need to connect your graphics card to the riser card and tighten the screws quickly. The connecting process is also quite simple, like the horizontal GPU connection. Once you do that, the vertical mount is ready to be installed.

Step 5- The Finale

Here comes the final step, where you need to connect the ribbon on the riser cable with the motherboard. Once you dO that, you need to connect the mounting bracket to the case and tighten it with the screws.

Once you do all these things, congratulations, you have transformed your PC and given it a modern and classy look!

The Final Words

Now, you know how you can mount your GPU vertically, and once you do it on your PC case, you can show it off to your friends or family. Then, if you have a YouTube channel, show it to your subscribers.

So, what are you even waiting for? You can get yourself a vertical mount adapter and make your PC look much more aesthetic and incredible!

Leave a Comment